Tag Archives: color

How Dye Transfer Works

A Simplified Expanation

If you got here by accident, you can read about my experience with dye transfer by going here.

NOTE: One of the overriding requirement for making a dye transfer print is to keep the three component colors (sometimes four if you add black for deep saturation) in perfect alignment. This is referred to as “registration”.

Color Separations Depending on the size of the transparency we use a 4″x5″ enlarger such as the one to the right or a larger 8″x10″ model. The original transparency is placed into the enlarger and projected through a red filter to make a negative on the monochrome film. Next the image is projected through a green filter to make a second negative and finally through a blue filter to make a third negative. Between exposures the enlarger is held totally immovable to maintain registration. Ahead of time the film is “punched” (similar to a paper punch) and placed onto an immoveable film holder so that all three exposures are in exact alignment. The three negatives are developed using conventional black and white chemicals.
To adjust the brilliance of the print a set of highlight negatives are similarly made. Here the exposures are quite short to produce a faint mask of only the brightest areas of the image – one each for the red, green and blue spectrum of the original. As its name suggests, this mask reduces the amount of exposure to the the image highlights.

A transparency has a very wide range of light values (brightness to shadow). Since it’s not possible to reproduce such a wide range, we have to make a set of contrast reducing negatives – again through red, green and blue filters.

The next step is to expose the gelatin coated mats. The thickness of the gelatin depends on the amount of exposure it receives. Each color negative is sandwiched with the corresponding contrast reducing and highlight masks and projected onto the mat material. Three mats are exposed one using the red filter negative, one using the green filter negative and the third using the blue filter negative. The mats are developed in a special tanning developer and when washed in hot water leaves a dye-absorbing gelatin surface.

The red filter mat is soaked in a cyan dye, the green filter mat in a magenta dye and the blue filter mat in a yellow dye. The amount of dye each mat absorbs depends on the thickness (and therefore exposure) of the gelatin. The mats are successively rolled onto the white photo surface using familiar registration techniques with the cyan, magenta and yellow dyes. The result is the dye transfer image.

You’ll find more detailed information about the dye transfer process than I am able to provide by clicking here.


 
 


Dye Transfer

Highest Quality Photos from an Earlier Era

As a youngster I caught the photobug early. I took loads of pictures and used my modest allowance and money gifts to buy darkroom supplies and equipment.

In high school I was thrilled when Mom helped me find a part time job working for a local photographer (a schoolmate of Mom from her earlier years). John taught me the ins and outs of the photography profession and later helped me land several jobs at high end photo labs in the Park Ave area of New York City where many large ad agencies were based.

In the 1960s these large ad agencies and their clients were requiring top notch photographs for their advertisements in the colorful gloss magazines and newspapers. Many of them insisted on dye transfer prints. These were photographs that had “exacting” contrast and coloring to make them pop on the publication pages.

The process to make a dye transfer print is quite involved. The original transparency is dissected into the three component colors and photographically transferred to dye-absorbent matrices – often referred to as a “mat”. The mats are bathed in three different color dyes and deposited one at a time onto white photo paper. The resulting print is a high quality reproduction of the original transparency. The intensity and brightness of the scene can be precisely adjusted at each step of the process allowing for the extremely fine quality prints demanded by the clients.

For those techies who are interested in the dye transfer process, you’ll find a short description here.

Below are a couple of sample dye transfer prints used in the advertising industry from the 1960s that I helped to produce. Both of these prints are approximately 20″ x 24″ in size.


a dye transfer made for an airline circa 1969

a dye transfer print made for a cigarette company circa 1968

The popularity of this form of photography especially in the advertising industry stems from the extensive precision the user has in controlling the individual colors, saturation, shading, contrasts, etc. This precision was not possible with any other process at the time.

However the arrival of digital photography changed the print processing landscape and dye transfer lost many of its advantages. By the early 1990s Eastman Kodak decided to stop making the dye transfer chemicals which portended the end of its run as the high quality king of prints.

While dye transfer is no longer a viable way to produce high quality prints, I thoroughly benefited and enjoyed learning in-depth photography from my several jobs making these photographic relics.

Written by: Arnie Lee

 
 


Fall is Here

But Don’t Put your Camera Away Just Yet

When Fall arrives, many of us like to cuddle up in the warm house and wait it out until Spring arrives. This is one way to avoid the cold, but certainly not the only way.


But the sun was brightly shining today. And although the temperature wasn’t exactly warm, the clear skies and slight breeze was perfect for those of us who were charged with putting the outdoor furniture away, rake the multiple of leaves and clean the yard ahead of the next season’s snow.

But after completing the chores, the splendid colors called out to me to take a few snapshots. So inside I went to retrieve one of the cameras.


I slowly walked around the house and in a quick ten minutes my session was complete. In no time at all I had taken a few fall photos to “brighten up” my day.
 

What can I say except “shake off those winter blahs” for at least a few more weeks. There’s plenty of days where they’ll be sun and at least a hint of warmth to make your outdoors bright and colorful.